CleanIt300
Compact wall or bench unit with an internal brine tank. For kitchens, clinics, hotels and small sites.
30–300 ppm · up to 240 L/h · 150 W · 11.8 kg
On-site disinfectant generation
Water and salt in. Sanitizer out.
CleanIt generators turn tap water, food-grade salt and electricity into hypochlorous acid (HOCl) sanitizing solution — made on demand, at the strength you set, right where you use it.
How it works
Three steps from water to sanitizer.
01
Feed
Filtered water flows in; a dosing pump adds a measured stream of salt brine.
02
Electrolyse
The electrolysis cell converts chloride into free available chlorine.
03
Use
HOCl solution flows out ready to use, from 30 to 300 ppm.
Why CleanIt
Disinfectant on your terms.
Made on demand
No drums of bottled disinfectant to buy, ship or store. Produce only what you need.
Strength you control
Set output from 30 to 300 ppm with flow, current and dosing settings.
Simple consumables
Runs on water, pure salt and electricity. Optional acid dosing for pH 5–6.
Built-in protection
Digital panel with live current and voltage, plus alarms for low flow, current, voltage and fan faults.
Choose your model
CleanIt300 or CleanIt1200.
CleanIt1200
High-capacity wall unit with an external brine tank. For food plants, farms and large facilities.
30–300 ppm · up to 1,200 L/h · 700 W · 21.2 kg
Specifications
Compare the models.
| CleanIt300 | CleanIt1200 | |
|---|---|---|
| Output (free available chlorine) | 30–300 ppm | 30–300 ppm |
| Production capacity | up to 240 L/h | up to 1,200 L/h |
| Product pH | 5.0–7.0 | 5.0–7.0 |
| Cell current setting | 13–22 A | 20–65 A |
| Minimum feed flow | 1 L/min | 4 L/min |
| Power supply | AC 100–240 V, 50/60 Hz, 150 W | AC 100–240 V, 50/60 Hz, 700 W |
| Dimensions (W × D × H) | 31 × 16 × 42 cm | 35 × 24 × 52 cm |
| Weight | 11.8 kg | 21.2 kg |
| Brine tank | Internal, 2 L | External |
| Mounting | Wall or bench-top | Wall bracket |
| Operating modes | Standard; Level (auto start/stop with tank float switches) | Standard |
Site requirements (both models)
- Feed water hardness below 80 ppm
- Water and brine 10–30 °C
- Room 5–50 °C
- Humidity below 96% RH
- Max. 3.4 bar (50 psi)
- Ventilated room
- Earthed outlet
Supplied with
- Wall bracket and fixings
- Sediment pre-filtration
- Inlet and outlet fittings and tubing
- Thread seal tape
- Installation and operation manual
Applications
Where CleanIt is used.
Food & beverage processing
Commercial kitchens
Hotels & hospitality
Clinics & care facilities
Farms & livestock
Facility cleaningDownloads
Brochure and user manuals.
Brochure — CleanIt Series
CleanIt300 user manual
CleanIt1200 user manual
Enquiry
Request a quote
Tell us about your application and we will get back to you at the email address you provide.